Constant current LED driver LC flexC SR SNC4 with adjustable output current, IP20 The LED driver LC flexC SR SNC4 from TRIDONIC is suitable for LED lights with protection class II. The output current can be set as required using a DIP switch (250, 300, 350 or 400 mA). Whether for a spot or downlight in retail and catering applications or for a panel in the office: the LC flexC SR SNC4 LED driver can be used universally as an independent fixed-output LED driver.

Technical features / compatibility - for lights in protection class II, with M and MM in accordance with EN 60598, VDE 0710 and VDE 0711 - selectable fixed output current via DIP switch 250, 300, 350 and 400 mA (preset current 250 mA) - mains voltage range: 220 - 240 V - AC voltage range: 198 - 264 V - max. input current (at 230 V, 50 Hz, 50 Hz) - max. input current (at 230 V, 50 Hz) - max. input current (at 230 V, 50 Hz) - max. input current (at 230 V, 50 Hz) - max. input current (at 230 V, 50 Hz) - max. input current (at 230 V, 50 Hz). Input current (at 230 V, 50 Hz, full load): 0.088 A (88 mA) - mains frequency: 50 / 60 Hz - output power min. / max.: 6 W / 16.8 W - max. output voltage (U-OUT): 55 V - nominal service life: up to 100,000 hours - good switching resilience: 50.000 switching cycles Protection functions - Overload protection - Short-circuit protection - Open-circuit protection - Overtemperature protection - Protection against burst voltages 1 kV - Protection against burst voltages 1 kV (between L and N) - Protection against surge voltages 2 kV (between L/N and earth)