For outdoor areas - theLuxa P220 motion detector (PIR) with Gross detection range TheLuxa P220 motion detector is the first choice for outdoor areas, especially in commercial and public areas. In particular, it enables needs-based lighting control for hotels, schools, underground car parks, warehouses and administration buildings. Both wall and ceiling mounting is possible. The detection range can be reduced by attaching a cover clip (included). theLuxo P220 impresses with numerous features: sensitivity can be reduced to restrict the detection range, FELV (Functional Extra Low Voltage) switching, teach-in of the current brightness value, pulse function, test function for checking the detection range. Die installation with flush-mounted box (60 mm) is possible. The motion detector can be put into operation immediately thanks to presetting. The adjustment elements are protected. Equipped with dummy terminal for protective earth. A cover frame is included in the scope of delivery - Detection angle: 220° - Range: max. 16 m - Brightness setting range: 5 to 1,000 lux - Run-on time: 1 s - 20 min - Mounting height: 2 to 4 m - One-hand plug-in base mounting - IP code IP55 - Switching capacity: 10 A (at 230 V AC, cos φ = 1) 10 AX (at 230 V AC, cos φ = 0.3) - Incandescent/halogen lamp load: 2.300 W - Fluorescent lamp load (LLB) parallel-compensated: 1,300 VA 140 µF - Compact fluorescent bulbs: 300 W - LED under 2 W: 60 W - LED over 2 W: 600 W - Remote-controllable: yes (available via accessories) - Ambient temperature: - 25 °C to + 45 °C