|Luminous colour||warm white (3,000 K)|
|Light bulb included||Yes|
|Light bulb||3 x 5 W LED|
|Length (in cm)||50|
|Width (in cm)||8.6|
|Height (in cm)||20|
|Other measurements||ceiling canopy diameter - 8 cm; lampshade diameter - 8.6 cm|
|Light output||3 x 400 lm|
|Total luminous flux||1200|
|Operating voltage in volts||230|
|Supply voltage in volts||230|
|Energy efficiency class||A+|
Nostalgic Easydim ceiling lamp Ebbi with three lampshades
Without a doubt, the LED ceiling lamp Ebbi radiates a nostalgic, if not industrial effect. The light has three cylindrical lampshades which, like the frame, are made from metal and almost look like cans. At the front, the lampshades are also furnished with a grated cover which rounds off the look.
From a technical point of view, it is definitely worth mentioning that the LED ceiling lamp is equipped with functional Easydim lamps which embody an innovative dimming technology. You no longer need a permanently installed dimmer on the wall to adjust the brightness. Nowadays, all that is required is a switch on the wall, as the Easydim technology demonstrates impressively. You can use the switch to turn the light on and off, as well as to dim it as soon as the LED ceiling lamp has been turned on. To do this, press the switch twice in quick succession (within two seconds) and the brightness will slowly fall to a minimum of ten per cent of the full value. If you want to stop the process and set a level of brightness, activate the light switch twice in quick succession for a second time.
A++ A+ A B C D E Show full energy efficiency label
Mon to Fri: 8.00am - 5.00pm
Contact us via e-mail
Questions & Answers (1)
Can the Easydim lights be used with an existing conventional dimmer switch?
Hi Saffron 15,
Yes you will be able to use this light fitting in-conjunction with your existing dimmer switch.
Customer Reviews (1)
3-bulb Easydim ceiling lamp Ebbi with LEDs
Nice looking lights. Terrible installation.
The insulation block on the the lights appears to have very small scre...
The insulation block on the the lights appears to have very small screws, which means you have to have the lead from your ceiling fitting EXACTLY under the screw.This was incredibly frustrating as time and time again, I screwed the insulation block in, only to find the wire slip out again as it was on either side of the screw. I have never experienced this before, and I have fitted many light fittings in my time.
Easy if you have the fitting in front of you on a bench, but a nightmare in reality halfway up a ladder trying to support the weight of the fitting in one hand and screw the leads in with the other.
Doesn't come with any fixing screws for the ceiling bracket either.
Great looking lights, horrendous to fit.
- No, I cannot recommend this product.